Fines and technical penalties on projects' contractors
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
1-1
|
Perform work without obtaining work Permit
|
1000
|
5000
|
On each site, violator must restore the site to its original condition on his own expense
|
1-2
|
Non – renewal of work Permit or exceeding its scope/time
|
200
|
500
|
Stop the work until violation is corrected. Apply heavier fines if repeated
|
1-3
|
Failure to place a work permit at the work site
|
500
|
800
|
For each site. Heavier fines when repeated
|
1-4
|
Blocking streets without PERMIT
|
5000
|
10000
|
Restore condition. Apply the heavier fines when repeated
|
1-5
|
Disconnect of automatic fire extinguishing systems without prior permission
|
1000
|
3000
|
Repair the damage and pay the costs of damage
|
1-6
|
Failure to return ENTRY/ACCESS permit after the end of contract
|
500
|
1000
|
Apply Minimum fine. If repeated, apply the higher fine
|
1-7
|
Disabling of fire alarm system control panel without permission
|
1000
|
3000
|
Repair the damage and pay the costs of damage
|
1-8
|
Conducting hazardous work requiring special work permits "welding, confined space, low oxygen places, working at heights" without PERMIT
|
500
|
1000
|
Stop the work until conditions are met and apply the heavier fine when repeated
|
2.Clothes and protection
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
2-1
|
Workers not wearing or damaged PPEs (personal protective equipment), contrary to international standards
|
1000
|
3000
|
Fine per each worker. Stop the work till compliance
|
2-2
|
Conducting welding work without using safety precautions
|
1000
|
2000
|
stop the work until the conditions are met and apply the heavier fines when repeated
|
2-3
|
No secure guardrail for working at heights
|
2000
|
3000
|
Secure the site immediately. Apply the heavier fine when repeated
|
2-4
|
No site fence, instructions boards or warning signs at work site that may pose risks to traffic or people
|
5000
|
10000
|
Pay all costs of damage and apply the maximum limit when the violation is repeated or when not corrected
|
2-5
|
Failure to maintain the fence or signs or warnings at the work area.
|
3000
|
5000
|
For each site apply the heavier fines when repeated
|
2-6
|
Noise level above 85 decibels without proper of personal protective equipment (PPE)
|
1000
|
2000
|
Stop work until safety requirements are met
|
2-7
|
Work outside the official working hours or at night without written consent and providing appropriate safety means for work at night
|
200
|
500
|
Apply the minimum fine and when repeated apply the max fine
|
3. Non- matching
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
3-1
|
Non-conformity of the scaffolding and ladders with specifications in terms of type and installation
|
5000
|
10000
|
Suspension of work until the conditions are fulfilled and the maximum fine is applied when it is repeated
|
3-2
|
Absence of appropriate fire extinguishers in the workplace
|
1000
|
2000
|
Suspension of work until the conditions are fulfilled and the maximum fine is applied when it is repeated
|
3-3
|
Expired fire extinguishers inspection or lack of maintenance
|
500
|
1000
|
Apply the minimum fine and when repeated apply the max fine
|
3-4
|
Failure to provide emergency exit at the site
|
1000
|
2000
|
Suspension of work until the conditions are fulfilled and the maximum fine is applied when it is repeated
|
3-5
|
Lack of First Aid kit in the workplace
|
500
|
1000
|
Provide First Aid kit in the workplace and apply the maximum fine when repeated
|
3-6
|
Employment of unskilled labor who are not safety oriented
|
1000
|
2000
|
Apply a minimum fine with a commitment to train the workers
|
3-7
|
Operation of unlicensed or non-approved machinery by a third party to proving their validity
|
500
|
1000
|
Suspension of work until the conditions are fulfilled and the maximum fine is applied when it is repeated
|
3-8
|
Driving vehicles/machinery by an unlicensed worker
|
500
|
1000
|
Suspension of work until the conditions are fulfilled and the maximum fine is applied when it is repeated
|
4. electrical hazards
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
4-1
|
Increase electrical loads on electricity sources
|
500
|
1000
|
With the removal of the violation and apply the maximum fine when repeated
|
4-2
|
Cutting of electrical and communication cables.
|
3000
|
5000
|
Repair the damage and pay the costs of damage
|
4-3
|
Disconnecting electricity from fire pumps without obtaining approval
|
1000
|
3000
|
Re-connect the electricity and apply the maximum fine if repeated
|
4-4
|
Leave the electric cables uncovered
|
2000
|
3000
|
Removal of the violation and apply the maximum fine when repeated
|
4-5
|
Not reconnecting electricity to fire pumps after completion of work
|
1000
|
3000
|
Re-connect the electricity and apply the maximum fine if repeated
|
4-6
|
Use of unsuitable and non-conforming electric sockets and plugs
|
500
|
1000
|
Suspension of work until the conditions are fulfilled and the maximum fine is applied when it is repeated
|
4-7
|
Use of mechanical or electrical rooms for storage
|
500
|
1000
|
Apply the minimum fine and when repeated apply the most fine
|
4-8
|
Installation of fire safety systems, equipment or fire protective materials not approved by the Security and Safety Department
|
2000
|
3000
|
Repair the damage and pay the costs of damage
|
4-9
|
Use of cutting/grinding power tools (grinder) by untrained worker/defected grinding wheel/ or removal of the grinder protective cover
|
1000
|
2000
|
Suspension of work until the safety conditions are fulfilled
|
5. Work environment and public damage
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
5-1
|
Causing a fire resulting from negligence
|
10,000
|
20,000
|
Stop work until the conditions are met and apply the fines
|
5-2
|
Causing injury to third parties resulting from negligence.
|
10,000
|
20,000
|
Stop work until the conditions are met and apply the fines
|
5-3
|
The fall of dust and similar from trucks, or the lack of necessary load covering/protection
|
500
|
1000
|
With the removal of the violation and apply the maximum fine when repeated
|
5-4
|
Failure to refill holes and return the surface to what it was after the completion of work on the site.
|
5000
|
10000
|
Fill holes and restore the surface to what it was at the expense of offender
|
5-5
|
Failure to remove the excavation debris (waste) after work.
|
5000
|
10000
|
Waste transfer at the expense of offending
|
5-6
|
Causing Damage to fire extinguishers or their protective boxes
|
200
|
500
|
Repairing the damaged part at the expense of the violator
|
5-7
|
Use of roads or public places contrary to security and safety instructions or cause danger or inconvenience
|
2000
|
4000
|
With the removal of the violation and apply the maximum fine when repeated
|
5-8
|
Littering/Throwing wastes in the workplace
|
1000
|
2000
|
With the removal of the violation and apply the maximum fine when repeated
|
5. Work environment and public damage
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
5-9
|
Forcing workers to work in hot weather
|
1000
|
2000
|
Stop working until the temperature drops and apply the maximum fine when repeated
|
5-10
|
Leakage of petroleum materials from tankers and machines
|
5000
|
10000
|
With the removal of the violation and apply the maximum fine when repeated
|
5-11
|
Violation of safety instructions in transporting, storing and packing petroleum and chemical materials
|
2000
|
3000
|
With the removal of the violation and apply the maximum fine when repeated
|
5-12
|
Failure to re-connect the disconnected automatic extinguishing systems after completion of work
|
1000
|
3000
|
Re-connect the systems and apply the maximum fine if repeated
|
5-13
|
Failure to cover inspection holes (Manholes) after completion of work
|
1000
|
2000
|
Cover inspection holes with heavier fine when repeated
|
5-14
|
Failure to report an accident at work or trying to hide it
|
300
|
500
|
Apply the minimum fine and if repeated apply the heavier
|
5-15
|
Failure to report injuries at work, whatever their size
|
500
|
1000
|
Apply the minimum fine and if repeated apply the heavier fines
|
5-16
|
Destructing or removing guide signs or warning signs inside or outside the buildings
|
500
|
1000
|
Repair the damage and pay the costs of damage
|
5. Work environment and public damage
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
5-17
|
Destruction or removal of Thermometer
|
500
|
1000
|
Repair the damage and pay the costs of damage
|
5-18
|
Installing/removing/or repairing fire equipment/prevention/suppression without approval from safety & security Department
|
1000
|
2000
|
Repair the damage and pay the costs of damage
|
5-19
|
Change direction, obstruct, or disable direction signs for emergency exit routes and emergency exit signs
|
1000
|
2000
|
Suspension of work until the safety conditions are fulfilled
|
5-20
|
Change the direction or obstruct or disable standby emergency lights
|
1000
|
2000
|
Apply the minimum fine and when repeated apply the most fine
|
5-21
|
Existence of gas cylinder (fuel) inside the company
|
500
|
1000
|
With the removal of the violation and apply the maximum fine when repeated
|
5-22
|
Any action that may harm public safety
|
200
|
500
|
Apply the minimum fine and when repeated apply the most fine
|
5-23
|
Accumulation of wastes and not transporting them regularly outside the work site or dumping in a place other than the allocated dumping place
|
500
|
1000
|
Immediately transfer the waste and apply the maximum fine when it is repeated
|
5-24
|
Damaging paved streets and sidewalks when using crawler equipment or other equipment causing damage
|
5000
|
10000
|
Repair the situation and apply the maximum fine when it is repeated
|
5. Work environment and public damage
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
5-25
|
Storing/obstructing the egress route/corridors or in front of emergency doors
|
200
|
500
|
Apply the minimum fine and when repeated apply the most fine
|
5-26
|
Non-removing and lifting work equipment after completing the work at the company's sites
|
1000
|
3000
|
Repair the situation and apply the maximum fine when it is repeated
|
6. Dangerous behaviors
|
No.
|
Violation type
|
First time
|
Second time
|
Penalties
|
6-1
|
Deliberately tampering with the manual extinguisher and releasing its contents (other than for approved training purpose ) or misplacing them
|
200
|
500
|
Repair the damage and pay the costs of damage
|
6-2
|
Deliberately tampering or taking the contents of the first aid box
|
200
|
500
|
Repair the damage and pay the costs of damage
|
6-3
|
Deliberately tampering or disabling or putting the fire alarm system on manual mode without written consent
|
5000
|
10000
|
Apply the minimum fine and when repeated apply the most fine
|
6-4
|
Eating, drinking and sleeping in locations where this is not permitted
|
200
|
500
|
Apply the minimum fine and when repeated apply the most fine
|
6-5
|
Deliberately tampering with the fire suppression system, causing its release
|
5000
|
10000
|
Apply the minimum fine and when repeated apply the most fine
|
6-6
|
Tampering with “BREAK GLASS” box next to emergency doors
|
500
|
1000
|
Apply the minimum fine and when repeated apply the most fine
|
6-7
|
Use of emergency doors to enter and exit
|
500
|
1000
|
Apply the minimum fine and when repeated apply the most fine
|
6-8
|
Carelessness and unsafe act that may cause injury to a person, colleague or the public
|
500
|
1000
|
Suspension of work until the safety conditions are fulfilled
|
6-9
|
Failure to observe Public ethics in clothing or by physical/verbal aggression
|
500
|
1000
|
Apply the minimum fine and when repeated apply the most fine
|
6-10
|
Disrupting, obstructing or objecting the inspectors' duty
|
300
|
500
|
Apply the minimum fine and when repeated apply the most fine
|
